Common problems during nuclide identification
Although nuclide identification is very straightforward with HyperLab, there are a few typical issues which can be easily addressed by the following tips.
Improper energy calibration
If you experience a poor quality nuclide identification, please always check if
Improper efficiency curve selected
In case of the peak intensities of the nuclear library shows large deviations from the fitted peaks, always check that you are using the proper efficiency calibration curve, that is, which is prepared for the same measurement setup, and it is created more or less at the time when your measurement was taken.
 
 
Copyright © 1998-2024 by HyperLabs Software